Breakout Board & Peripheral

FR-E2Sxy

Breakout Board & Peripheral
The E2S enables the serial target device to have an Ethernet function. Therefore, the
serial target device is able to connect a LAN/ WAN immediately without any hardware change.
The E2S is able to translate the protocol from TCP/IP packet to a kind of serial data
stream just likes RS-232, RS-485, UART-TTL or SPI depends on the different E2S model.
On the other hand, E2S is also to translate the data stream from a serial to TCP/IP packet.
It provides an easier way to connect Ethernet by DHCP client or DNS client. Besides, a
customized web page can configure E2S for an adaptive setting.
Product Features
 Small size, Low cost, and efficiency
 Support serial device is able to connect a LAN/ WAN immediately without any hard - ware change
 Power supply: DC 5V
 Operating Temperature: -20°C to 80°C
Specification
Ethernet Interface
  • Auto -negotiation 10/100Mbps w/ RJ45
  • Full/Half duplex
  • Network support DHCP client/ DNS client/ Web Server/ Telnet Sever
  • Protocol support IP, UDP, TCP
  • Support auto -MDIX
Uart/ RS485/ RS232-TTL options:
  • Support 3 -wire or 5 -wire w/ Header
  • Support Baud Rate up to 921600 bps
SPI-TTL options:
  • Support 5 -wire w/ Header
  • Working in Master mode
  • Support clock rate up to 1MHz
Software Support Remote Configure over embedded Web Page with password
Power supply DC 5V
Dimensions ( L x W x H) 67mm x 40mm x 19.5mm.
Operating Temperature
  • Commercial : 0°C ~ 70°C
  • Industrial : -20°C ~ 80°C
Ordering Part number FR-E2Sxy
x
  • "U"- interface Uart-TTL.
  • "R"- interface RS232
  • "S"- interface RS485
  • "P"- interface SPI
y
  • "F"- Commercial version
  • "I"- Industrial version
Downloads
FR-E2Sxy User Manual 下載

Feature Products